An AC motor was modified so that the coil, with the core (lament core) was in a U-shape and with the coil of wire in the bottom of the U.  The coil will need to be mounted across from the permanent magnet(s).  The controller assembly is steel on the ends, allowing flux to flow through from the permanent magnet(s) energizing the coil.  Aluminum can be used as a breaking system with magnetism.   For the sake of more proof that there is another part to the magnetic field, use Aluminum for the center part of the controller assembly.  The shaft can go between the poles, allowing the coil and the permanent magnet(s) to be stationary.  I have one facing pole North and the other South.  Now, looking at the picture and reading this do you see how it is made?  If not send me an email or phone call.  At different speeds you will see the different reactions as shown on my video.  Wardforce, forward and backward motion can be used for work!   

The picture above shows close up of an EPMC.  It is also a link to another FREE video with more information

If you have questions, email me at energyingenuity@gmail.com

How to control Wardforce is not so simple to describe, but speed is a key factor.