Permanent Magnet On/off Induction Switch

U.S. patent pending 61478379

  Using a ferrous material (separated by air or non-ferrous material) for producing heat, and having coils of wire on a ferrous (laminate or solid) core, touching certain parts of the other ferrous material for taking current, while a shaft is attached to Magnet(s)/rotor(s), the Magnet(s) can float free in lubrication (we used a plastic paddle, placed in a grove on the end of the ceramic Magnet(s), with it being uncoupled, the Magnet(s) self aligned) for self alignment and so that the shaft can be used for taking torque.

The air gap, or non-ferrous material, is used as a switch.  This process of switching the Magnetic Field on and off to the core demonstrates multiple Hysteresis Loops are used.  With no air gap between the core and the source of the Magnetic Field, all problems in US patent # 5191258 and US patent #7531930 with the Hysteresis loop was eliminated.   With all three of these methods, while producing energy, when a load is applied at one speed backward motion, an opposing force will be witnessed.   At a faster speed there will be no change with forces needed when the load is applied.  Then, at an even faster speed, this force helping the motion, forward motion is generated when current is taken from the coil(s).

When the Magnet(s) are positioned so that the forces are locked (closed position) a drop in activity on the coil(s) occurs, then when the Magnet is in the open position, high activity on the coil(s) occurs, causing the two Poles to generate an AC current during both changes.   This clean energy process converts magnetic energy into torque, heat, and an AC current, simultaneously. 

Who are the right people to see this?  Why are you and your children still not learning about how to use Magnets for producing clean green energy?

New clean energy process, energy from Magnets!

Everything is verifiable!